10
•
System:
Input Mode
[only for channel A + B]
In A analog, In A digital
In B analog, In B digital
Here you can switch the input A resp. the input B to „analogue“ or „digital“. By doing this, you
have the possibility to apply an analogue and / or digital audio signal on input A / B.
On input C + D you can only operate with an analogue audio signal. You will find more
information on page 13.
Link Mode / Content
[only for link A + B]
Source, A:C/d1, B:D/d2, A+B/d1 mono, C+D/d2 mono, C+D always,
B+C+D, A+B+C+D
The link mode of the DA 428 offers comprehensive possibilities for controlling the audio signal
to analogue or digital systems. You will find detailed information in the table on page 12.
Password
In this menu item you can enter a max. 8-digit password. If you have entered a password and
activate the “lock function” you must enter the password again to unlock the unit. You will find
detailed information on page 14.
RSNC baud rate
prospectively available
Brightness
[adjust brightness of the LCD graphic display]
Contrast
[adjust contrast of the LCD graphic display]
•
Software:
Firmware Version
Firmware Update DSP
Update i²C EEPROM