background image

 

20

 

English

Disposal of your old appliance

1. When this crossed-out wheeled bin symbol is attached to a product it 
means the product is covered by the European Directive 2002/96/EC.

2. All electrical and electronic products should be disposed of a separately 
from the municipal waste stream via designated collection facilities appointed 
by the government of the local authorities.

3. The correct disposal of your old appliance will help prevent potential 
negative consequences for the environment and human health.

4. For more detailed information about disposal of your old appliance, please 
contact your city office, waste disposal service or shop where you purchased 
the product.

Deutsch

Entsorgung von Altgeräten

1. Wenn dieses Symbol eines durchgestrichenen Abfalleimers auf einem 
Produkt angebracht ist, unterliegt dieses Produkt der europäischen Richtlinie 
2002/96/EC.

2. Alle Elektronik-Altgeräte müssen getrennt vom Hausmüll über dafür 
staatlich vorgesehene Stellen entsorgt werden.

3. Mit der ordnungsgemäßen Entsorgung des alten Gerätes vermeiden Sie 
Umweltschäden und eine Gefährdung der persönlichen Gesundheit.

4. Weitere Informationen zur Entsorgung des alten Gerätes erhalten Sie bei 
der Stadtverwaltung, beim Entsorgungsamt oder in dem Geschäft, wo Sie das 

Klingenthaler

Musikelektronik GmbH

Auerbacher Straße 268

08248 Klingenthal   Germany

phone +49(0)37467 558-0

www.kme-sound.com

 

 
 
WEEE-Reg.-Nr. DE 84296747 
 
 
 
 
 
 
 
 

 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
Klingenthaler Musikelektronik GmbH 
Auerbacher Straße 268 
08248 Klingenthal 
Germany 
phone +49 (0) 37467-558-0 
fax +49 (0) 37467-558-33 
[email protected] 
www.kme-sound.com 

 

 
 
 
 
 
 
 
 
 
 

Technical State October 2010. 
The content corresponds to the state at printing. Subject to technical alterations. Misprints and errors expected. 

Summary of Contents for DA 230





















Reviews: