11
K-Line™ G-Set™ Top Cover and Guard Installation
2
Locate the second half of the cover/sprinkler
support and screw into place ensuring the
base of the sprinkler is firmly held around the
orange slip ring on the sprinkler. Three screws
are supplied to attach the second cover half.
Install the stockguard on the shell with the four
remaining screws and the unit is ready to use.
2
1
1
NOTE: If using a battery drill to install the screws, avoid
stripping the plastic shell of the G-set by not over-tightening.
Install the bearing in the center hole of the
stock guard. This black plastic bearing is
designed to keep cattle from pushing down
on the guard and collapsing the guard onto
the sprinkler.
3
3
2
Bottom Guard Plug
Top Guard Cap
