![background image](http://html2.mh-extra.com/html/k-laser/blue-dental/blue-dental_operating-instruction_3093245055.webp)
Operating instructions K-Laser Blue Dental Rev. ZE
Page 55 of 72
5.8 Error messages and warnings
Laser Stop
The laser has been
deactivated by pressing
“Laser Stop” button.
Interlock open
Please wait until the
interlock is closed.
Check interlock plug on
back of machine..
Wear protective
goggles
Before proceeding it is
advised to put on the
laser safety goggles.
PIN code not correct
Wrong pin code was
entered. Please try
again.
Delete treatment
Delete treatment
Insert USB device
Plug the USB device into
USB connector.
Error. Wrong USB
device
The USB device was not
accepted. Please plug it
in again or try another
USB device.
Connect plug to the
DC-IN
Connect the DC-IN
connector to the device.
Battery low.
Please recharge.
The battery level is low
and needs to be
charged.
Battery very low.
Estimated power
for 180 s.
The battery level is very
low (remaining power for
180 seconds) and needs
to be charged.
Wait laser
source cooling.
To avoid damage of the
laser source please wait
and let the device cool
down.
Fan not working.
Switch off the device.
Cooling fan is not
working. To avoid
damage please switch
off the device and let it
cool down for a while.
Name already
present.
The name is already
present in the list.
Error
Contact service.
A malfunction has
occurred. Please contact
authorized service
center.