KMT12P
Ver. 1.2
10
10. TECHNICAL SPECIFICATIONS
Notes for data
1. Maximum RMS applicable power for a musical signal. The reference signal is the one proposed by EIAJ standard
2. With dedicated preset;
3. Measured @4 mt then scaled @1 mt;
4. Measured with musical signal
New materials and design are introduced into existing products without previous notice. Present systems may differ in some respects from those presented in this catalogue.
The contents of this manual are furnished for informational purposes only. K-array s.u.r.l. assumes no responsibility for any errors or inaccuracies that may
appear in this manual. K-array s.u.r.l. reserves the right to make modifications without prior notice.
ACOUSTICS
Power handling
1600 W
Max Power
2800 W
(1)
Impedance
4
Ω
Frequency range (-10 dB)
30 Hz – 150 Hz
SPL 1W/1mt
101 dB
Maximum SPL
133 dB (cont.) – 139 dB (peak)
COVERAGE
Horizontal
omni
Vertical
omni
CROSSOVER
Type
External crossover required
Frequency
Low pass @ 150 Hz
(maximum - preset dependent)
TRANSDUCERS
Type
2 X 18” Neodymium magnet woofer
with 3” voice coil
POWER AUDIO IN/OUT
Connectors
2 x 4 pin Speakon
Wiring
1+ 1 -(signal IN & Link); 2+ 2- (through)
RECOMMENEND AMPLIFIERS
Type
KA84, KMT218
PHYSICAL
Dimensions
94.9 cm x 48.0 cm x 60.0 cm
(37.4“ x 18.9” x 23.6“)
Weight
49.0 kg (108.03 lbs)
