Mugello-KH I
User Guide
25
Technical Specifications
Mugello-KH2 I
Technical specifications
Type
Self powered line array element
Transducers
2x 8” neodymium magnet woofers with 2.5” voice coil
2x horn loaded compression drivers with 2.5” voice coil
Frequency Response
1
120 Hz – 19 kHz (-6 dB)
Max SPL
2
142 dB peak
Coverage
V. 20° digitally adjustable in array | H. 110°
Connectors
Line Input:
2x XLR-F analog balanced / AES3 input
Line Output:
2x XLR-M Link analog balanced / AES3 output
Speaker Output:
2x SpeakON NL4 (Ch1 1+/1- // Ch2 2+/2-)
Mains:
powerCON TRUE1 TOP, 16 A true mains
Networking and Data:
1x RJ45, 4x USB-A
DSP
Input gain, routing matrix, delay, full parametric IIR fil
-
ters (Peaking, Shelving, Hi/Lo pass, Hi/Lo Butterworth),
FIR filters, Onboard preset, Remote monitoring
Remote Control
Ethernet connectivity:
Web APP and K-framework3 software
Amplifier Module
4-channel switching mode, Class D
Output Power
4x 1500 W @ 4 Ω
MAINS Operating Range
100-240V AC, 50-60 Hz with PFC
Power Consumption
600 W @ 8 Ω load, Pink noise, 1/4 rated power
Protections
Over Temp. (Power Limiting – Thermal Shutdown), Short
Circuit/Overload Output Protection, Power Limiting,
Clip Limiter/Permanent Signal Limiter, High Frequency
Protection
Technical specifications
Rear Panel
CH1
LINK
CH2
LINK
AES3
OUT
AES3
IN
1/2
3/4
Handling & Finishes
Material
Polyurea coated birch plywood
Colors
Black, Custom RAL
IP Rating
IP53
Dimensions (WxHxD)
net dimensions: 735 x 285 x 200 mm
(28,94 x 11.22 x 7.87 in)
with rigging hardware : 831 x 285 x 210 mm
(32.7 x 11.22 x 8.27 in)
Weight
29 kg / 63.93 lb
with rigging hardware
1
With dedicated preset.
2
Maximum SPL is calculated using a signal with crest factor 4 (12dB) measured at
8 m then scaled at 1 m.