K-array Lyzard-KZ14RI, User Manual, Page: 7 / 19

5
USER GUIDE
2
3
Installation
New Lyzards are available in 2 different models here
presented. The Lyzard-KZ14 I’s compact new design
comprehend a unique fully enclosure that incorporates
the internal of the speaker to the grill, and make a
complete body all as one. With the recessed version,
the mounting and installation is thought to be quick and
easy, with the new metallic clips attached to the body’s
speaker .
For permanent installation of the KZ14 I, a kit including a
mounting measure template is recommended.
Follow these operating instructions:
1. Take the little neodymium magnet found into the
speaker’s package and take off the grille. (steps
1-2-3 explain in the picture below)
2. Make 2 holes in the wall using a drill. This two holes
has to be the same dimensions and match the 1x
hole inside the speakers.
3. With a screwdri v er of 2 mm , screw the speakers
and gently mount it to the wall.
4. Then, take back the grille to the speaker’s body. So
the KZ14 I is finally installed!
5. The user can also install the speaker with the
dedicated adhesive pad found into the package,
take the adhesive pad, attach it to the rear panel
of the speaker and attach the speaker to the wall.
(Fig. 3. - 1-2-3, 3.2 - 2-3-4, 3.3 - 1 -2 -3)
3.
1