K-array KRM33, User Manual

Page: 9 / 24

KRM33
REV. A 9
install it near heat emitting appliances, such as a room heater or stove.
No naked flame sources such as lighted candles should be placed near the device.
Operate the device in a place where the temperature is between -20°C and 50°C (-4°F to 122° F). Avoid
dramatic changes in temperature or humidity when using it, as condensation may form on or within the
device.
During the use, it is normal for the device to get warm. The exterior of the device functions as a cooling
surface that transfers heat from inside the unit to the cooler air outside.
The device should be placed so that its location does not interfere with its proper cooling. For example,
the device shouldn’t be placed on beds, carpets or similar surfaces that could create an obstacle for the
ventilation openings.
To reduce the risk of electric shock, unplug the power cord before connecting audio cables.
Set up your device on a stable horizontal surface. If combined or mechanically connected with other products,
always verify the stability of the system set up. Install the unit only in a location that can structurally support
the weight of the unit, far away from people who can interfere with the stability of the system. In case
of outdoor installation, assure that the wind does not interfere with the system’s stability, taking extra
securities like chains, weights, ropes or any other certified anchoring systems. Doing otherwise may result
in the unit falling down, causing personal injury or property damage. Doing otherwise may result in the unit
falling down, causing personal injury or property damage. The system should only be suspended by qualified
personnel following safe rigging practices. Secure fixings to the building structure are vital. To clarify any
doubt you may have, seek help from architects, structural engineers or other specialists.
Protect the power cord from being walked on or pinched.
This audio system is not intended for use in the operation of nuclear facilities, aircraft navigation or
communication systems, air traffic control systems,or for any other uses where the failure of the audio
system could lead to death, personal injury, or sever environmental damage.
Do not make repairs yourself. Caution, risk of electric shock. Do not open the device, it contains
potentially hazardous voltage. Never attempt to disassemble, repair or modify the system yourself.
Disassembling the unit may cause damage that is not covered under the warranty. The device contains no
user-serviceable parts. Repairs should only be performed by factory trained service personnel. Do not plug
the power cord if you suspect that your device needs service or repair.
Voltage requirement. Make sure that the supplied voltage stays within the specified range. Verify that your
mains connection satisfies the power ratings of the device.
Only connect the power supply to an appropriate power outlet.
Warning: The device must be only connected to an AC three-wire grounding outlet. If your outlet isn’t
grounded, contact a licensed electrician to replace it with a property grounded outlet.
Warning: connecting the system to an AC power mains with a voltage exceeding 270 V will cause
significant damage to the device and create a serious risk for users!
The devices which feature powerCON connectors allow power supply to other devices from the
white outlet socket. The maximum power value which can be picked up from that socket changes
according to the device model. Please, read the user manual carefully.