K-array Kommander-KA, User Manual

Page: 13 / 28

Kommander-KA
User Guide
13
Remote Connectivity
The Kommander-KA amplifier unit features a built-in hot spot
establishing a local Wi-Fi network dedicated to remote control
the amplifier with mobile devices.
The default local Wi-Fi SSID and unit IP address are printed on a
label located on the rear plate of the unit; a QR code for easing
the connectivity is printed as well.
The RJ45 Ethernet port on the rear panel allows to connect
the unit to a local area network (LAN). Since every host on a
network must be identified by a unique IP address, the simplest
local network usually implement a router/switch with a DHCP
server managing the addresses allocation: by default the
Kommander-KA unit is set to obtain a local IP address from the
DHCP server.
In case a DHCP server is not present on the LAN, the unit goes
in AutoIP mode: in few seconds the amplifier automatically self-
assign an IP address in the range 169.254.0.0/16.
A static IP address can be assigned to the amplifier unit using
the amplifier’s embedded web app (Network menu).
The Kommander-KA amplifiers can be controlled remotely by a
mobile device or desktop PC/MAC.
K-array Connect mobile app
K-array Connect is the mobile app that allows
to direct manage and control a Kommander-KA
amplifier with a mobile device (smartphone or
tablet) wireless.
Download the K-array Connect mobile APP from
the dedicated store of your mobile device.
Embedded web app
The integrated operating system osKar features a complete
web user interface accessible over the network: connect to the
Kommander-KA02 I on a local network or wireless via its built-in
hot spot and access the web app with a web browser (Google
Chrome recommended).
K-framework3
The K-array K-framework3 is the managing and
control software dedicated to professionals
and operators looking for a powerful tool for
designing and managing a large number of
units in demanding applications. Download the
K-framework3 software from K-array website.
K-framework3
WINDOWS and OSX software
Connectivity Reset
With the unit switched on, keep pressed the RESET button
on the rear panel for 10 to 15 seconds in order to:
• Revert the wired IP addressing to DHCP;
• Activate the built-in Wi-Fi and reset the wireless
parameters to the default SSID name and password
The status LED turns purple while the RESET button is
pressed.
Router/switch
with DHCP server
PC or MAC
Smartphone
Kommander-KA
K-framework3
K
K
K
10s 10s