K-array KH7, User Manual

Page: 12 / 28

Ethernet
Ethernet
KH7-SIGIN
XLR XLR Ethernet
Ethernet
AESOP wiring configuration
KH7 Ver. 1.2
12
8.1 aes/ebU vIa eTheRneT — Kh7-sIGIn
AESOP (AES Ethernet Simple Open Protocol) is the network dedicated to live applications where high
quality audio, easy system configuration and reliability must be guaranteed. Control data and AES/EBU
digital signals travel through the same Ethernet cable at 100 Mbit/s. RJ45 dual port design allows daisy
chain and redundant ring topologies. Moreover, Fault Bypass Technology overcomes any faulty device in
the network, assuring solid connectivity without any audio or control signal loss.
In order to connect your digital source to the unit via Ethernet cable, you need the KH7-SIGIN accessory.
It is a cable which features a RJ45 connector at one end and three connectors at the other including 2
female XLR connectors (AES/EBU Channel A and Channel B) and a RJ45 connector (Data).
When using Armonia software to remotely control the device, make sure to select the correct input in
the Input Routing page: Digital Network A for AES/EBU channel A or Digital Network B for AES/EBU
channel B.
AES/EBU
Channel A
AES/EBU
Channel B
DATA
from PC