K-array KH15, User Manual, Page: 8 / 27

KH4, KS4 and KH15 have a powerful DSP that manages all the functions of the speakers. Each system can store on board 16 preset
that can be recalled pushing the PRESET button. Once the preset will appear on the lower line of the display it will become
automatically available after few seconds. If you desire to set a preset as “default” you just need, once selected it, to keep pressed
for five seconds the PRESET button. After that, this preset will automatically be recall each time you will switch on your module. It is
also possible to remote each module by an RS485 serial port. In order to remote your system, you need to set each module on a
different address, so that, in your chain, no one module will have the same address. Two rotary encoders allow you to set the desired
address number that will appear on the top line of the display. Using the remote control software it is possible to mute each system,
select a desired preset loaded on-board or download a new preset pack.
For remote control operation please refer to REMOTE CONTROL AND SOFTWARE MANUAL in the next pages.
ADDRESS FOR REMOTE CONTROL
FROM PC OR PREVIOUS MODULE
TO NEXT MODULE
PRESET LOADED
ADDRESS X 10
PRESET SCROLL
RESET BUTTON
ADDRESS X 1
8. DSP CONTROL & REMOTE CONTROL
P. 7 USER'S MANUAL
Connecting more than 3 modules by RJ45 8 poles cable, the display of
the last off module will start lighting.
To connect high quantity of modules together by remote control, it
suggested to use K-array special 3 pole cables or XLR adapters.
CAUTION
CAUTION