KY102
Ver. 1.2
8
7. wIRING
KY102 internal wiring is designed to pick up audio power signal from pins 1+ / 1- of a Speakon NL4
connector. Pins 1+ and 1-, such as pins 2+ and 2-, are directly wired from one socket to the other, so the
two sockets are equivalent and can be used to connect the speaker to the amplifier or to connect the
speaker to another KY102 driven in parallel by the same amplifier channel.
NOTE:
• The K-array KA84 amplifier can drive up to two KY102 @ 8
Ω
per channel or up to four KY102 @ 32
Ω
in bridge mode.
• The K-array KMT218 and KMT21 powered subwoofers can drive
up to two KY102 @ 8
Ω
.
7.1 IMPEDANCE SwITCh
KY102 features a switch which allows users to select the impedance of the speaker (8
Ω/32Ω).
The value to be selected depends mainly on the amplifier you use to drive the unit. To find the correct
impedance value to be set on the unit, we recommend that you check the Output Configuration Page
on your K-array KA amplifier or KMT active subwoofer you use to drive the unit. Please refer to your
amplifier or KMT’s User Guide for further details.
IMPEDANCE SWITCH
COVERAGE SWITCH