K-array KA14 User Manual Download Page 6

KA14

6

Ver. 1.2

5. UNPACKING 

Each K-array amplifier is built to the highest 
standard and is thoroughly inspected before 
leaving the factory. Upon arrival, carefully inspect 
the shipping carton, then examine and test your 
new amplifier. If you find any damage, immediately 
notify the shipping company. Only the consignee 
may institute a claim procedure regarding the 
system’s electronic equipment.

6. INCLUDED ACCESSoRIES

• 

Power cable

• 

USB cable

• 

Rubber pads for flat surfaces installation

• 

Rack brackets

wARNING

• 

 Since the device is a CLASS I apparatus, it must be only connected to an AC  

three-wire grounding outlet

.  

If your outlet isn’t grounded, contact a licensed electrician to replace it with a property grounded 
outlet.

• 

 To reduce the 

risk of electric shock

, disconnect the amplifier from the AC mains power before installing 

audio cable. Reconnect the power cord only after making all signal connections. Do not use the product 
if the power cord is broken or frayed. Protect the power cord from being walked upon or pinched.

• 

 To completely disconnect this apparatus from the ac mains, 

disconnect the power supply

 cord plug 

from the ac mains connector.

• 

 Voltage  requirement

. Make sure that the supplied voltage stays within the specified range. Verify that 

your mains connection satisfies the power ratings of the device.

• 

Only connect the power supply to an 

appropriate power outlet

.

• 

Do not install the amplifier in 

wet or humid locations

 without using weather protection.

• 

 TO REDUCE THE 

RISK OF FIRE OR ELECTRIC SHOCK

, do not expose this apparatus to rain or moisture 

and objects filled with liquids, such as vases, should not be placed on this apparatus.

• 

The main plug of the power supply cord shall remain readily accessible.

CAUTION

• 

 Choking  Hazards

. This device contains small parts, which may present a choking hazard to small 

children. Keep the device and its accessories away from small children.

• 

 

Temperature. 

Operate the device in a place where the temperature is between -20°C and 35°C (-4°F 

to 95° F). Avoid dramatic changes in temperature or humidity when using it, as condensation may 
form on or within the device.

• 

 Do not make repairs yourself

. Caution, risk of electric shock. Do not open the device, it contains 

potentially hazardous voltage. Never attempt to disassemble, repair or modify the system yourself. 
Disassembling the unit may cause damage that is not covered under the warranty. The device contains 
no user-serviceable parts. 

Repairs should only be performed by factory trained service personnel.

 Do 

not plug the power cord in if you suspect that your device needs service or repair.

Summary of Contents for KA14


















Reviews: