P. 6
USER'S MANUAL
9. REMOTE CONTROL SOFTWARE
1 . To connect the K-array modules to a PC, it is needed a RS485-USB adapter, we recommend the K-USB adapter (pic.1).
2 . Install the K array control software from installer in the CD-ROM
2.1 Start the Karray_manager_V2 from Windows - Start - Software - Karray_manager_V2
2.2 Click on NO when ask for demo mode start
2.3 Click on System - Settings to configure which COM port use, the COM port of K-USB, usually is the higher number.
If you don't find, you can check it on windows-control panel-system-hardware-COM Port
Connect the K-usb to a PC and install the drivers required included in the CD-ROM.
K-USB
USB to RS485 adapter
1
Operating systems:
Win98/98SE/Me/2000/XP/Vista
Minimum requirements:
CPU
300 MHz
RAM
128 Mb
Recommended requirements:
RAM
512 Mb
SYSTEM REQUIREMENTS
