K-array Capture-KMC50, User Manual

Page: 8 / 20

6
Assembling
In order to operate the Capture-KMC50, the microphone and
the proper preamplifier kit – either the K-PREMC01 or the
K-PREMC02 – must be assembled.
Single-unit microphone assembly
The K-PREMC01 preamplifier is designed to drive a single
Capture-KMC50 microphone unit.
The K-PREMC01 single unit preamplifier kit comprises the
top cap and the bottom adapter with cable and MiniXRL
connector. Follows the images below to assemble the
microphone.
The connectors on top and at the bottom of the
microphone are shaped according to the unit
orientation.
Set the microphone cap and the adapter with cable
at the opposite ends of the unit.
Plug the miniXLR connector to the K-PREMC01
preamplifier.
Capture-KMC50
User Guide
FRONT
(straight edge)
PORT
53
4 m
m
[2
1 i
n]
PLUG
FRONT
(straight edge)
BACK
(curved edge)
1
2
3
BACK
(curved edge)