Operation
29
content of the input signals is to be rejected. AC coupling enables a high
pass R-C filter through the input signal path, with corner frequency
(-3dB) about 0.4 Hz.
IEPE Input
For applications utilizing sensors such as accelerometers or micro
-
phones, the USB-62405 provides an excitation current source.
The excitation current is 2 mA for the IEPE sensors, with DC voltage off
-
set generated because of the excitation current and sensor impedance.
When enabling IEPE current sources, the USB-62405 automatically sets
input configuration to AC coupling.
Figure 3-3: Excitation Current for IEPE Sensor Measurement
3.2.2
AI Data Format
When an A/D converter is used, properties of the signal to be measured
must be ascertained to determine the channel to be used and connec
-
tions to the card. After A/D conversion, the A/D data is buffered in a
Data FIFO, for transfer to memory for further processing. Transfer char
-
2mA
Constant
Current
VCC
IEPE ON/
OFF
AI Channel
6
Summary of Contents for USB-62405
