PCIe/PXIe-6302 |
| 29
Block’s TCO+ (Pin#35) and TCO- (Pin#1);
Terminal block connection automatic detection
Open
Winform Terminal Block State;
Set other parameters as shown and click
Connect
, the result is shown below.
Figure 23 Terminal Block State Check
Connectors
show the working state of the
Terminal Block.
5.4
Open thermocouple detection
The thermocouple open circuit detection function is provided in the driver to help
the user detect the connection status of the thermocouple.
When the user calls the method PerformOpenThermocoupleDetection, the
PCIe/PXIe-6302 outputs 0.5 µA/ 2 µA/ 4 µA (software configurable) excitation
current on all TC+ terminals, traversing each enabled channel for voltage acquisition.
This method returns a
Dictionary
that represents the open-circuit detection results
for each channel.
Learn by Example 5.4
Connect the K-type Thermocouple’s positive pole and negative pole to Terminal
Block’s TCO+ (Pin#35) and TCO- (Pin#1);
Open
Winform Open Thermocouple Detection;
Choose Channels in
Channel ID.
Set other numbers as shown and click
Detect
, the result is shown below.
Summary of Contents for PCIe/PXIe-6302
