JYTEK PCIe-67432, Manual

Page: 20 / 32

10 Getting Started
Configuration
All PCI/PCIE Express cards on your system are configured individually.
Because configuration is controlled by the system and the software, no
jumper setting is required for base address, DMA, and interrupt IRQ.
Configuration is subject to change with every boot of the system as new
PCI/PCIE Express
®
cards are added or removed.
Troubleshooting
If your system fails to boot or if you experience erratic operation with
your PCI/PCIE Express card in place, an interrupt conflict may have been
generated (such as when the BIOS Setup is incorrectly configured).
Refer to the system’s BIOS documentation for details.