
* IMPORTANT
–
PLEASE READ BEFORE INSTALLATION! *
Before attempting to fit the DWPS102U, it is important to ensure the following
information matches that of the door you wish to automate.
JWS are always happy to check information/pictures of the door you wish to
automate to check suitability of the operator.
All work undertaken on automatic doors must comply with EN16005 and JWS
always recommend using a suitably qualified company / contractor.
THE DOOR MUST BE LESS THAN 1.2m WIDE, UNDER 120kg, have at least
100mm above the door for mounting and have
NO
closing system fitted in the
frame, door or jamb. If Inward Opening, the Door Face must be flush to the
header (not recessed). If outward Opening, the reveal depth must be less than
195mm.
THE DWPS102U
IS NOT
SUITED FOR A BUSY THOROUGHFARE: i.e. a school
entrance, supermarket entrance or other high traffic areas.
PUSHING AND PULLING OF THE DOOR WITH A DWPS102U WILL CAUSE
DAMAGE TO THE INTERNAL COMPONANTS
–
THIS IS NOT COVERED BY
MANUFACTURER, OR JWS WARRANTY.
ENSURE YOU FIT THE CORRECT ARM FOR THE
DOOR YOU ARE AUTOMATING.
DWPS102U
FOR INWARD OPENING
FOR OUTWARD OPENING