SPLASH PROOF AM/FM Radio with CD Player V10M10_IM_EN_08132007
www.jWIN.com
3
USER SAFETY GUIDE
COMPLIANCE OF FCC RULE
This device complies with Part 15 of the FCC Rules. Operation is subject to the condition that
this device does not cause harmful interference.
Note: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
SPLASH RESISTANCE
This unit has been constructed to resist mild steam and light splashes from the shower or bath
only. It should not be operated under running water and under no circumstances should it be
fully immersed in water. This unit isn’t a water-resistant device.
Compatibility
AUDIO CD
1.
Disc Size: 12cm / 8cm
2.
Disc Type: CD
DISC ERROR
This compact disc player has built-in error compensation circuits to correct for minor defects in
a disc. There are limits, however, to the amount of correction available. In some cases, the CD
player may skip some tracks, or parts of tracks, on a disc during disc play. This problem may be
caused by defects (such as scratches) in the disc being played, which are too large for the error
compensation circuits to handle. If you encounter this problem, try a new disc before having the
unit serviced. If the CD player operates normally, the skipping problem is probably due to a
defective disc.
Note:
Only the above types of discs can be played on this unit. Some CD-R, CD-RW discs cannot be
played depending on the condition of the player and the disc.
SPLASH PROOF AM/FM Radio with CD Player V10M10_IM_EN_08132007
www.jWIN.com
8
OPERATIONAL INSTRUCTIONS
Repeat and Intro Functions-continued
4. To play the audio tracks in the random order, press the
P.MODE
button until the indication
“
RDM
” appears on the LCD screen. The random function is disabled in the programmed
play mode.
Programmed Playback
The
PROGRAM
function allows your favorite tracks to be played in a programmed sequence.
This feature can be set in the stop mode or normal play mode.
1. Press
the
PROGRAM
button to start programming. The indication “
PGM
” and track
number “
01
” start blinking on the LCD screen.
2. Use
the
SKIP
(
/
) buttons to select your desired track.
3.
After selecting the track, press the
PROGRAM
button to save the selected track in the
memory. The indications “
PGM
” and “
02
” will appear on the screen and blink while waiting
for the next input.
4.
Repeat step 2 and 3 to program more tracks. You can program up to 20 tracks into the
memory in any sequence order.
5.
To check the programmed tracks, press the
STOP
button and then
PROGRAM
button.
Each press of the
PROGRAM
button will show the programmed track accordingly on the
LCD screen.
6.
Press the PLAY / PAUSE (
) button to start the programmed playback.
7.
To cancel the programmed play, press the
STOP
button twice.
Listening to Radio
1. Set the FUNCTION select switch to the "RADIO" position.
2. Set the BAND select switch to either "AM" or “FM”.
3. Adjust the TUNING knob to obtain the desired radio station.
4. Adjust the VOLUME control knob to obtain the desired sound level.
5. To turn off the radio, set the FUNCTION select switch to the "CD" position.
