E.6
CLEANING THE CABINET
Wipe with a soft cloth. If the cabinet is very dirty, dampen (not dripping wet) the cloth
with a weak solution of soap water, and then wipe clean.
HANDLING COMPACT DISCS
1. This unit is designed to play compact discs bearing the identification
logo to the right. Discs that do not carry this logo may not conform to
the CD standard and may not play properly.
2. Dirty, scratched or warped discs may cause skipping or noise. Pay
attention to the following: Handle the disc only by the edges. To keep
the disc clean, do not touch the surface of the disc.
3. Discs should be returned to their cases after use to avoid serious
scratches that could cause the laser pickup to skip.
4. Do not expose discs to direct sunlight, high humidity, or high temperatures for ex-
tended periods. Prolonged exposure to high temperatures can warp the disc.
5. Do not stick or write anything on either side of the compact disc. Sharp writing instru-
ments, or the inks used in some felt-tip pens, may damage the surfaces of the disc.
6. Always place the compact disc to be played in the CD compartment with the label
facing upward. CD can be played on only one side.
CLEANING DISCS
1. Fingerprints should be wiped from the surface of the disc with
a soft cloth. Unlike conventional records, compact discs have
no grooves to collect dust and microscopic debris, so gently
wiping them with cloth should remove most of the particles.
Wipe in a straight motion from the inside to the outside of the
disc.
2. Never use such chemicals as record cleaning sprays, anti-static
sprays, benzene or thinner to clean compact disc. Such chemi-
cals can damage the plastic of the disc.
• The unit will not play a disc that has been inserted upside down, or discs that do not
conform to the Compact Disc standard. Also, the unit might not play discs that are
scratched, soiled or carry fingerprints.
• Both 8cm and 12cm discs can be played in this unit.
TECHNICAL SPECIFICATIONS
CD PLAYER SECTION
Frequency response ....................... 20Hz-20KHz
Wow and flutter .............................. below measure limits
Sampling frequency ....................... 44.1KHz
D/A converter ................................. 1-bit
Error correction method ................ CIRC
Pick-up ............................................. optical 3-beam semiconductor laser
(780 nM wavelength)
GENERAL
Power supply DC ............................ 3V using two “AA” batteries
AC/DC adaptor 220V - 4.5V
Dimensions ....................................... 138mm(W)x138mm(D)x29.5mm(H)
Weight .............................................. 212 grams
COMPACT
DIGITAL AUDIO
