background image

E.3

3. Hold the disc with the label side up and press it onto the spindle until it “clicks”

into place.

4. Close the disc compartment, press PLAY/PAUSE button, the disc will begin to spin,

the display will indicate “01”, play will begin immediately from track number 1.

5. Adjust the volume as desired.
6. Set the BASS BOOST function as desired.
7. To stop play temporarily, press the PLAY/PAUSE button.

• The track number flashes in the display.
• Press the PLAY/PAUSE button again to resume.

8. To stop play, press the Stop Button, and the power turns off automatically after a while.

Note:

Both 8cm and 12cm discs can be played in the unit.
Place only one disc at a time in the CD compartment.

USING OF REMOTE CONTROL AUDIO

1. Hold key: 

It is useful during playing. The function will lock the key to protect the

mistake in the playing

2. Stop button:

 Press this button when you finish to play.

3. Play/Pause:

 Press this button, then the disc will begin

to start. To stop play temporarily, press this button again.

4. CD Skip: 

Press these buttons during play to skip to the

desired track. Press these buttons and hold during play
to scan the disc at high speed.

5. Phone Jack:

 Plug headphone in this jack to listen music.

6. Volume Control:

 Adjust this volume as desired.

TRACK SEARCH

• Press the 

and 

 button during play to skip to the desired track.

• Press the 

 to skip to the next track on the disc.

• Press the 

 to skip to the beginning of the track currently playing.

• Press the 

 twice or more to skip to previous tracks.

FORWARD/REVERSE SEARCH

Press and hold the skip (

 ) button during play to scan the disc at high speed.

When the desired section of the disc is found, release the button. Normal play will resume.

----forward           

----reverse

• If you press and hold the skip button (

) while playing, it will scan the current

playing track forward at high speed.

• If you press and hold the skip button (

) while playing, it will scan the current

playing track backwards at high speed.

BASS BOOST

Use the Bass Boost function to increase the bass output when listening with
headphones. During bass boost on setting, sometimes, you may hear some distortion,
adjust the volume control to a lower level when using the bass boost feature.

PROGRAMMED PLAY

The tracks on the disc can be programmed for play in any order. (Up to 24 tracks
can be  programmed.)
During programming, “PROG” flashes in the display.

NOTE: 

Programming is possible in the STOP mode.

HOLD

VOLUME

5. PHONE
   JACK

6. VOLUME
    CONTROL

3. PLAY/
    PAUSE

4.CD SKIP

1. HOLD KEY

2. STOP 

Program number

Track number

1

2

3

3

5

9

Summary of Contents for JX-CD477









Reviews: