Portable Audio CD Player V30M30_IM_EN_05272009
www.jWIN.com
- 3 -
OPERATING INSTRUCTIONS
Playing a Disc
Be sure to reduce the volume before plugging in or unplugging the
headphones.
1.
Plug the headphones (included) into the
HEADPHONE
jack.
2. Press
the
CD OPEN
button to open the CD compartment.
3.
Hold the disc with the label side up and press it in until it “clicks” into
place.
4.
Close the disc compartment, press the
PLAY / PAUSE
X
II
button.
5.
Adjust the volume as desired.
6. To
temporarily
stop playback, press the
PLAY / PAUSE
X
II
button.
The elapsed playing time flashes in the display. Press the
PLAY /
PAUSE
X
II
button again to resume playback.
7.
To stop play, press the
STOP
/ POWER OFF
button. The power will
turn off automatically when the entire disc has played or after
approximately 30 seconds of inactivity.
Programmed Play
The tracks on the disc can be programmed for playing in any order.
1. Press
the
STOP
/ POWER OFF
button during playback.
2. Press
the
PROG
Button and select the desired track by pressing the
or
buttons, and then press the
PROG
button again to program
the track.
3.
Repeat Step 2 for all tracks to be programmed.
4. Press
the
PLAY / PAUSE
X
II
button to begin the programmed
playback.
NOTE:
When playback stops, the programming will be erased.
5.
To cancel programmed playback, press the
STOP
/ POWER OFF
button.
Repeat Playback
•
To play a single track repeatedly, press the
MODE
button repeatedly
until “
” appears. Press the
PLAY / PAUSE
X
II
button if playback
is stopped.
•
To play the entire CD repeatedly, press the
MODE
button repeatedly
until “
” appears. Press the
PLAY / PAUSE
X
II
button if
playback is stopped.
•
To cancel the Repeat Function, press the
MODE
button repeatedly until
“
” or “
” disappears.
