12/30/20039:53 AM Page5
INSTALLATION
EASY SET UP
•
Use the coiled cord to connect the receiver to the base or console.
•
Use the flat cord to connect the phone base to the wall jack.
•
Open the battery cover (on the bottom of the phone base) and install 4 “AA”
batteries (not included).
Note
:
Without batteries the phone will still dial and receive calls. However, the memory
functions will not operate.
TONE/PULSE SELECTOR
Select the type of dialing that you desire or that your telephone requires:
•
TONE
The unit will operate using tone dialing.
•
PULSE The unit will dial using rotary dial type pulses.
RINGER HI/LOW/OFF
When you don’t want to be disturbed by incoming calls slide the ringer switch to the
“Low” or “Off” position.
L
OW
-- indicates that the ringer volume will be diminished but can still be heard.
O
FF
-- indicates that the ringer volume is turned off and there will be no sound to signal
an incoming call.
