4
L O A D I N G A N D U N L O A D I N G C O M P A C T D I S C S
L
O A D I N G
AND
U
N L O A D I N G
C
O M P A C T
D
I S C S
m
Press the STANDBY button to turn the unit on.
m
Slide the FUNCTION Switch to the CD position.
m
Press the right side of the CD door, labelled
]
PUSH OPEN/CLOSE
^
to open the CD
compartment.
m
When the disc compartment has opened, insert the disc with the label side facing up.
Push down in the centre until disc is locked in place.
m
Close the disc compartment by pressing the
]
PUSH OPEN/CLOSE
^
. When the
compartment is fully closed, the disc will start turning automatically. The total number
of tracks will appear in the display.
m
The disc compartment may be opened at any time by first pressing the stop button and
then pressing the
]
PUSH OPEN/CLOSE
^
. Remove the CD only after the compartment
has fully opened.
C
AUTION
Do not put anything except a compact disc into the compartment. Foreign objects can
damage the mechanism.
Keep the disc compartment closed when not in use to prevent dirt and dust from entering
the mechanism.
Never place more than one disc into the disc compartment at any time.
If the disc is correctly loaded, the total number of tracks on the disc will be displayed:
Notes:
After the disc compartment is fully closed, the disc information may not
appear on the display. This means that the disc is improperly loaded (most
likely it is upside down). To check, open the disc compartment again and
reload the disc.
D I S C P L A Y
m
Insert a CD as described in the previous section and close the disc compartment.
m
The display will then show the total number of tracks.
m
Press the PLAY/PAUSE button to start playback.
m
Adjust the VOLUME control as desired.
To skip forward or backward through the tracks on the disc, press the SKIP forward /
backward buttons.
m
When the disc is through playing, it will stop. Press STOP button to stop disc before it
is finished.
Notes:
- If the disc is deeply scratched, or too dirty, disc play may not start. If an
improperly centred disc is played, noise can be heard in the mechanism.
The use of such discs should be avoided.
- If the disc is inserted incorrectly, or the disc is damaged the display will
show
]
No disc
^
.
Summary of Contents for JL-CD808
Page 1: ......
