HOME DVD PLAYER
V10M10_IM_EN_12312007
www.jWIN.com
16
GETTING STARTED
Dolby® Digital Setup Page
DYNAMIC
Select your desired
Dynamic Range
Compression Rate (DRC)
to adjust linear
compression results of the
signals.
1.
Select Dolby and
press Navigation
button to enter
Dynamic setting
mode.
2. Press
Navigation
button to highlight
the DRC level indicator, then press Navigation ,
buttons to select your DRC rate
level.
3. Press
button to confirm your selection. Press SETUP button to exit the Setup
menu.
Preference Page
The menu gives you options to change some aspects of the DVD player to fit your preference.
To access the Preferences Setup Menu, press the SETUP button while the player is in STOP
mode. Select the Preference Setup using the Navigation
button. Press
and select the
desired options using Navigation , , ,
buttons to browse through the menu/submenu
and press the button to confirm selection.
AUDIO
Choose to selects the
dialogue language: English,
French, Spanish, German
or Japanese.
SUBTITLE
Choose to select the
subtitle language: English
French, Spanish, German,
Japanese, or Off.
DISC MENU
Choose to select the disc’s menu language: English, French, Spanish, German or Japanese.
Note:
Discs are engineered differently. The DVD player cannot override some languages or
preferences. If a disc’s software was created to play the movie (title) in a preferred language,
the preference you set might be ignored. Also, if the language isn’t available on the disc you’re
playing the disc’s default languages will be chosen. If the disc wasn’t created with subtitles, you
won’t be able to use the Subtitle feature.
DEFAULT
Select this option to reset all preferences to their original factory settings.
HOME DVD PLAYER
V10M10_IM_EN_12312007
www.jWIN.com
17
OPERATIONAL INSTRUCTIONS
Playback of a DVD
1.
Plug the power cord of your DVD player into the outlet once it is connected to your TV.
2.
Turn on the TV and tune to its Video input channel, if necessary.
3.
Press the STANDBY/STOP button on the DVD player or the STANDBY button on the
remote control to turn it on.
4.
Press the OPEN/CLOSE button on the front of the player or remote control to open the
disc tray.
5.
Place a disc gently into the tray with the disc’s label facing up (double-sided discs have
content on both sides, so you can place the disc with either side up.)
6.
Press OPEN/CLOSE again to close the disc tray. Play starts automatically. If a menu
appears, one of its options can be selected to start playing the disc. Highlight it and
press
.
7.
Press STOP to stop playback. The player remembers the point where disc was stopped.
8.
If you press PLAY again, playback resumes from this point. To stop playback completely
or to start again from the beginning, press STOP twice.
Note:
If the player is left in STOP mode for more than one minute without any user interaction,
the screen saver is activated.
9.
To switch player to STANDBY mode press and hold the STOP button until the STANDBY
indicator appear.
REW / FWD
During playback, press either the REW
or FWD
button to move the DVD forward or
backward at double (2x) speed to locate a specific section. Repeatedly press these buttons and
the speed will increase to 4x, 8x, 16x and resume normal playback. The disc will move forward
or backward at high speed until you press the
button; normal playback will resume at that
point.
PAUSE / STEP
Press the PAUSE/STEP button to pause the picture. Repeatedly press the PAUSE/STEP
button to play the DVD one frame at a time. Press the
button to resume normal playback.
SKIP
Press the Skip
button to advance the disc to the beginning of the next chapter/track.
Press the Skip
button to move the disc to the beginning of the previous chapter/track.
ZOOM
Press the ZOOM button once during Normal or Still playback modes, and the unit will zoom
2x. Press once or twice more and the unit will zoom 3x, 4x. Use the Navigation
, , ,
buttons to move the image on the TV screen. Press the ZOOM button once more to
cancel
the zoom function. This is not available on all discs.