JWA YORKTON 72415, Assembly Instruction Manual

Page: 10 / 10

11
PRODUCT CARE:
As our timber is supplied from sustainable forests there will
be natural variations in surface texture and grain like knots,
mineral streaks and sap runs that may affect the finish. These
differences in character are not defects, but distinctions that
make each piece of furniture unique
• Our furniture is built to last. Following these steps for basic
care should protect your investment for years to come
• Dust frequently with a clean damp lint-free cloth. This will
help remove abrasive build up which can damage a finish
over time
• Do not place hot objects on any furniture surface. Always
use a hot plate or placemat. Laminate and lacquer finishes
on table tops provide added scratch and heat resistance to
our furniture, but they can still be damaged without proper
care
• Avoid exposing your furniture to strong sunlight, heat outlet,
open windows or dampness. Prolonged exposure to direct
sunlight can fade the finish of your furniture, while extreme
temperature and humidity changes can cause cracking or
splitting
• Do not expose your furniture to any liquids. Never allow
water to sit on your furniture. Alcohol, nail polish and
perfume are also dangerous as they will dissolve the
lacquer finish on contact and may require professional
repairs
• Do not allow plastic to come in direct contact with your
furniture. Chemicals in the plastic of placemats etc. may
soften and mark the finish if left in contact with the furniture
for a period of time