background image

 

DO  NOT  OPERATE  APPLIANCE  IF  THE  LINE  CORD  SHOWS  ANY 
DAMAGE,  OR  IF  APPLIANCE  WORKS  INTERMITTENTLY  OR 
STOPS WORKING ENTIRELY. 
 

HOW TO USE THE ALCI 

This appliance is equipped with an ALCI (appliance leakage current 
interrupter) safety device specifically engineered for safety. It is for 
household use and may be plugged into a standard AC electrical outlet 
(ordinary household current). 
 

HOW ALCI SAFETY DEVICE WORKS 

The ALCI safety device in this unit is built into the plug. This device will 
make it is inoperable under some abnormal conditions, such as 
accidental immersion in water. 

If the appliance is immersed in 

water, do not attempt to reset the ALCI safety device

The ALCI safety device is equipped with a test button so that its 
operation can be checked. 
 

TO USE: 

1. 

Press the Reset button on the ALCI safety device. 

2. 

Plug your ALCI into an AC outlet then press the Test button.  

3. 

The Reset button will pop out. This verifies the safety device is 
operating properly. If the Reset button does not pop out, do not 
use the unit. Return it immediately for service. 

4. 

Press the Reset button to reactivate the ALCI safety device. Your 
hair dryer is ready for use. 

Repeat this procedure every time you use the hair dryer to confirm that 
the safety device is ready is operational. 
 

SPECIAL ATTENTION 

 

If the unit detects an electrical shock hazard, it will immediately 
shut off. To restore power, press the Reset button on the 
ESP/ALCI safety device to reactivate the circuit. 

 

This appliance is designed with a protective coating around the 
heating coils. When operating the first few times, you may notice 
momentary smoking when turning unit off. This represents no 
danger to the user and does not indicate a defect in the unit. This 
smoke should dissipate within a short time. 

Summary of Contents for ALTEO









Reviews: