CAUTION
- Never attempt to install the appliance yourself, unles you are a suitably
qualified technician.
Doing so may affect its operation and safety.
- Do not installed the appliance when it is connected.
- Install the appliance on a support that is sufficiently solid to attach it
securely.
Precautions before installing the appliance
Do not install the appliance in places with the following characteristics:
- Temperature lower than –10° or higher than +40°C.
- Places where the appliance may come into direct contact with water.
- Places exposed to severe condensation.
- Places where corrosive or neutral gases are present.
- At less than 20m or more than 2000m above sea level.
Information for installation
230V Version:
- Use a monophase AC current of 220V-240V / 50 Hz.
- Use a power supply cable with conductors with a cross-section of 2.5mm².
- Avoid places where the appliance could be hit by a door.
- Install the appliance on a perfectly flat wall.
- Allow for the power supply cable inlet.
- Find out the dimensions and space requirements of the product before
installing.
En
4
I
INSTALLATION /
بيكترلا
This appliance is designed to be used in commercial areas /
ةيراجتلا قطانلما في مادختسلال زاهجلا اذه ميمصت مت
Ar
Summary of Contents for 8111167
Page 14: ...1 ...
Page 16: ...3 I II III IV INSTALLAZIONE USO SPIE LUMINOSE CARATTERISTICHE TECNICHE 4 7 9 9 SOMMARIO ...
Page 27: ...4 Ar ...
