8
Ventilation is very important for this kind thermoelectric refrigerator; The inside PCB will be
damaged if the ventilation is bad; It will also reduce the lifespan of the refrigerator.
Caution
Keep your refrigerator out of direct sunlight.
Do not place next to heat generating appliance.
Do not place directly on the ground. Provide suitable stand
The refrigerator will have better performance at ambient of 20-25 degree; We suggest the
refrigerator be powered off if the ambient temperature is lower than 10 degree.
After plugging the appliance, allow the unit to cool down for 2-3 hours before placing beverage into
the refrigerator compartment.
Energy Saving Tips
The refrigerator should be located in the coolest area of the room, away from heat producing
appliances, and out of the direct sunlight.
Overloading the refrigerator forces the thermoelectric cooling system to run longer.
Reduce door openings and extended searches, remove as many items as needed at one time, and
close the door as soon as possible.
One characteristic of thermoelectric units is the length of time it requires to recover from having the
door opened and shut frequently. It may be necessary to wait longer for the temperature to return to
its former level once the door has been opened for too long. This is normal nature of the unit
ADJUTMENT OF THE TEMPERATURE
According to the models you can adjust the temperature at the back or inside the Minibar.
Adjustment at the back :
3 positions LO - MED - HI
The position HI is the coldest one.
Adjustment inside
:
4 positions 0 - 1 - 2 - 3
The position 3 is the coldest one.
MINIBAR CARE AND CLEANING
Turn off the power and unplug it before cleaning. Ignoring this warning may result in
injury.
Do not use harsh chemicals, abrasives, ammonia, chlorine bleach, concentrated
detergents, solvents or metal scouring pads. Some of these chemicals may
dissolve, damage and/or discolor your refrigerator to clean the unit.
Remove the contents of the appliance
Internal cleaning of the device:
Every month, Wipe the inside and outside surfaces with a damp cloth. The addition
of vinegar to the water is good for the prevention of mold and fungus. Wipe all parts
thoroughly after the cleaning.
External cleaning of the device:
Every month, clean the exterior surface of the unit with a diluted non-abrasive
detergent and water.
Once a year, clean the back of the unit with a soft brush or cloth; this part does not
require any particular maintenance.
The door gasket of the appliance must never come into contact with oil or grease.
IMPORTANT:
When the refrigerator is not in use it must be completely dry inside to
avoid mold
growth (if possible have the door open).
Summary of Contents for 8 66 1351
Page 10: ...10 ...
