JVCKENWOOD KENWOOD DMX1037S, Instruction Manual

Page: 73 / 108

Controlling Audio
73
English
Ñ
Zone Control
You can select different sources for front and
rear positions in the vehicle.
1
Touch
[
Dual Zone
]
on the FAD / BAL /
Zone screen.
■
[
Source
]
You can switch the current source.
2
Set each source as follows.
■ [
Zone Select
]
Touch
[
Single Zone
]
to turn off the dual
zone function.
■ [
Front Source
]
,
[
Rear Source
]
Select an audio source for each.
Rear Source;
“AV-IN”/“iPod”/“USB”/“OFF”
■ [
Rear VOL.
]
Adjust the rear source volume.
NOTE
• When the rear source is switched, the audio
source that is output at the AV OUTPUT terminal
is also switched to the same source.
• When the dual zone function is set to on, the
following functions are not available.
– Output from the subwoofer
– Subwoofer Level/Bass Boost
(P.74)
– Equalizer Control/Sound Effect/Listening
Position (P.69, 74, 70)
– Speaker Setup
(P.68)
– Fader for Controlling General Audio
– High-resolution Sound Source File Playback
• When the dual zone is selected and audio source
other than "OFF" is selected as Rear Source, the
speaker system cannot be switched.
• You cannot select AV-IN if the Video input
terminal is used for camera.
Rear Source
• You cannot select iPod if it is connected via
Bluetooth or Apple CarPlay is connected.
• If you select iPod as the Front Source, you cannot
select USB as the Rear Source.
• If you select USB as the Front Source, you cannot
select iPod as the Rear Source.
• If you select HDMI as the Front Source, files with
sampling rates higher than 96 kHz in USB selected
as the Rear Source are skipped.
• If you select Bluetooth audio, HD Radio, Wireless
Mirroring, Apple CarPlay or Android Auto as the
Front Source, you cannot select USB or iPod as
the Rear Source.