ENGLISH
69
“Station does not exist”:
• The selected station has been deleted by another
device or has expired.
“Cannot create a Station”:
• You cannot create a station during the read-
only mode or when network connection is not
established.
Troubleshooting
What appears to be trouble is not always serious.
Check the following points before calling a service
center.
• For operations with the external components,
refer also to the instructions supplied with the
adapters used for the connections (as well as
the instructions supplied with the external
components).
❏
General
No sound comes out of the speakers.
• Adjust the volume to the optimum level.
• Check the cords and connections.
No picture is displayed on the screen.
• Turn on the screen. (Page
8)
The unit does not work at all.
• Reset the unit. (Page
3)
The remote controller* does not work.
• Replace the battery.
*
For DDX7016BT Region 4: Purchase KNA-RCDV331 separately.
❏
Discs
Recordable/Rewritable discs cannot be played
back.
• Insert a finalized disc.
• Finalize the discs with the component which you
used for recording.
Tracks on the Recordable/Rewritable discs
cannot be skipped.
• Insert a finalized disc.
• Finalize the discs with the component which you
used for recording.
Playback does not start.
• The format of files is not supported by the unit.
No picture appears on the external monitor.
• Connect the video cord correctly.
• Select the correct input on the external monitor.
• Select the appropriate setting for
<AV-OUT>
.
(Page
53
)
DivX/MPEG1/MPEG2/MP3/WMA/AAC discs
cannot be played back.
• Record the tracks using a compatible application
on the appropriate discs. (Page
65)
• Add appropriate extension codes to the file
names.
Tracks on the Recordable/Rewritable discs are
not played back as you have intended them to
play.
• Playback order may differ from the one played
back using other players.
❏
USB
“Reading” does not disappear from the screen.
• Turn the power off and on again.
While playing a track, sound is sometimes
interrupted.
• The tracks are not properly copied into the USB
device. Copy the tracks again, and try again.
Tracks are not played back as you have intended
them to play.
• Playback order may differ from the one played
back using other players.
❏
iPod/iPhone
No sound comes out of the speakers.
• Disconnect the iPod/iPhone, then connect it again.
• Select another source, then reselect
“iPod”
.
The iPod/iPhone does not turn on or does not
work.
• Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• Reset the iPod/iPhone.
Sound is distorted.
• Deactivate the equalizer either on this unit or the
iPod/iPhone.
A lot of noise is generated.
• Turn off (uncheck) “VoiceOver” on the iPod/
iPhone. For details, visit <http://www.apple.com>.
No operations are available when playing back a
track containing artwork.
• Operate the unit after the artwork has loaded.
REFERENCES
REFERENCES
Continued on the next page...
DDX̲Mid̲M.indb 69
DDX̲Mid̲M.indb 69
2015/12/24 14:52
2015/12/24 14:52
