XV-S62SL
1-15
Adjustment method
(1) Test mode setting method
(2) Initialization method
(3) Method of displaying version of microcomputer
Please initialize according to the following procedures when microprocessor or pick-up is
exchanged and when the up-grade is done.
1)Take out the disc and close the tray.
2)Unplug the power plug.
3)Insert power plug into outlet while pressing both "PLAY" button and "STOP" button of the main body.
4)The player displays "TEST " on the FL display. " " means the player version.
5)When the power supply is turned off, test mode is released.
1)Makes to test mode.
2)After "FORWARD SKIP" button ( ) of the main body is pushed, "PAUSE" button is pushed.
3)A green progressive indicator lights when about ten seconds pass. Then, it is initialization completion.
(When scan mode is set to the progressive scanning, the indicator is green from red. )
1)Makes to test mode and initializes
2)When "CHOICE" button of remote control is pushed once, the figure is displayed on the FL display as follows.
2 3 _ 0 6 _ 1 6 _ F 9
FL Display
FL Display microcomputer (IC2)
Front end microcomputer (IC401)
Microcode of decoder
Decoder part (IC509)
POWER
Button
CHOICE
Button (switch of mode)
STOP
Button
(for test mode)
FORWARD SKIP
Button
(for initialize)
PLAY
Button
(for test mode or
display of jitter value)
PAUSE Button
(automatic adjustment
or initialize)
FL Display
PROGRESSIVE
Indicator
(for initialize)
The mode changes as follows whenever the "CHOICE" button of remote control is pushed in test mode.
TITLE Button
(laser ON)
BACK SKIP Button
(display of current value)
CURSOR UP Button
(firmware upgrade)
Becomes test mode
Version of microcomputer
Check mode
Confirmation of FL display
Not use mode
TEST_ _ -----------------------
_ _ _ ------------
CHECK ---------------------------------
FL display becomes all lighting ---
----------------------------
