(No.YD017)1-17
SECTION 4
ADJUSTMENT
4.1
Test mode setting method
(1) Unplug the power plug.
(2) Insert power plug into outlet while pressing both "PLAY" key and "STOP" key of the main body.
(3) The FL display shows "
∗
0", and the main body turns to test mode. "
∗
" means the destination, and "0" means parameter adjust-
ment status.The destination and a back end of version are displayed on the upper left of TV screen.
(4) To release test mode, press "POWER" key of the main body.
NOTE:
Each pressing of "SET UP" key of the remote controller in test mode changes the mode as follows.
4.2
Method of displaying version of firmware
(1) Set the main body at test mode.
(2) Press "SET UP" key of the remote controller once. Then, version number and alphabetical letter of the front end and the back
end are displayed in the FL display as follows:
4.3
Initialization method
Please initialize according to the following procedures in the following case:
• Just after you upgrade the firmware.
• After you confirm the symptoms that a customer points out. First Initialize, and then confirm whether the symptoms are improved or
not.
• After servicing, before returning the main body to a customer. (Initialized main body should be returned to a customer.)
(1) Set the main body at test mode.
(2) Press "FORWARD SKIP" key of the main body.
(3) When initialization is completed, the FL display changes from "
∗
0" to "
∗
00".(The left "0" of "00" is not always "0". It shows pa-
rameter adjustment status.)
Becames test mode
Version of firmware
Check mode
Not used
TEST 0 ----------------------
_ -------------
FL Display becames all lighting
CHECK -------------------------
EXPERT -----------------------
Backend
(exp. ver 2.24.0.2)
Frontend
0B_22402
FL Display (Example)
2
5
8
1
4
7
3
6
9
0
10
+10
TITLE
/GROUP
TV/VIDEO
CANCEL
RETURN
THUMBNAIL
/LIST
VOL
VOL+
CH
CH +
VFP
ZOOM
AMP
VOL
AUDIO
SOUND
EFFECT
SUB TITLE
SLIDE
EFFECT
ANGLE
DIMMER
REPEAT
OPEN
/CLOSE DVD/CARD
TV1
TV2
TV3
TV4
TV5
TV6
TV7
TV8
TV9
TV-/--
TV0
MUTING
TV
DVD
NEXT
PREVIOUS
SELECT
CLEAR
SLOW-
SLOW+
TO
P
ME
NU
ME
NU
ON
SC
RE
EN
SE
T U
P
ENTER
STANDBY/ON
TV
DVD
PROGRESSIVE
SCAN
SETUP key
(change of mode)
POWER key
STOP key
(for test mode)
PLAY key
(for test mode)
FORWARD SKIP key
(for initialize)
FL Display
