Advanced operations
20
XV-NP10S/LET0246-001A/English
A
d
va
nc
e
d
op
er
a
ti
o
ns
Special picture/sound effect
To zoom in pictures
1
During playback or while paused, press
ZOOM.
Pressing ZOOM causes the player to zoom in on the image.
Each time you press ZOOM, the magnification is changed
(1.5, 2 and 4 times).
2
Press
5
/
∞
/
2
/
3
to move the zoomed position.
To return to the normal playback
Select the normal size by pressing ZOOM repeatedly.
NOTE
While zoomed, the picture may look coarse.
To adjust the picture character (VFP)
The VFP (Video Fine Processor) function allows you to adjust the
picture character according to the type of programming, picture
tone or personal preferences.
1
During playback, press VFP - PROGRESSIVE
SCAN.
The VFP mode selection window appears on the TV screen.
• If you press the VFP-PROGRESSIVE button too long, the
button works for changing the scanning mode (see page 6)
instead of the VFP function.
2
Press
2
/
3
to select the desired preset.
Each time you press the button, the VFP mode changes as
follows.
Set the video type most suitable to the current program or the
room conditions.
[NORMAL]: for watching TV in a general room.
[CINEMA]: for watching a movie software in a room with
suppressed light.
[USER 1] [USER 2]: you can adjust parameters that affect the
picture character and store the settings as a user preset.
See the next step.
3
To define a user setting, press
5
/
∞
to select a
parameter to be edited from the following.
• GAMMA
Adjust this if the neutral color is bright or dark. The
brightness of dark and bright portion is maintained.
Available range: LOW/MID/HIGH.
• BRIGHTNESS
Adjust this if the picture is bright or dark on the whole.
Available range: –16 (darkest) to +16 (brightest).
• CONTRAST
Adjust this if the far and near position is unnatural.
Available range: –12 to +12.
• SATURATION
Adjust this if the picture is whitish or blackish.
Available range: –16 (blackest) to +16 (whitest).
• TINT
Adjust this if the appearance of flesh tone is unnatural.
Available range: –16 to +16.
• SHARPNESS
Adjust this if the picture is indistinct.
Available range: LOW/HIGH.
• Y DELAY
Adjust this if the picture looks separately/overlapped.
Available range: –2 to +2.
4
Press ENTER.
A window for setting parameters appears.
5
Press
5
/
∞
to adjust the level of the
parameter.
The higher value enhances the effect for each item other than
“GAMMA” and “SHARPNESS.”
6
Press ENTER.
Repeat steps 3 to 6 if you want to set other parameters.
USER 1
BRIGHTNESS
GAMMA
CONTRAST
SATURATION
TINT
SHARPNESS
Y DELAY
+ 4
MID
+10
+10
+10
LOW
+ 2
Selected preset
Parameter
SATURATION
+ 4
Selected parameter
XV-NP10[J_UJ].book Page 20 Monday, April 19, 2004 9:57 PM
