1-14 (No.XA011)
3.2.4
Removing the loading motor (See Figure 10 and Figure 11)
• Prior to the following procedure, remove the tray, the traverse
mechanism assembly, and the elevator.
(1) Remove the belt from the pulley.
(2) Remove two screws
C
attaching the loading motor.
(3) Remove two solders
h
on the switch board.
Fig.10
Fig.11
Loading base
Slide cam
Belt
㧯
㧯
Pulley
Pulley
Loading motor
Switch board
Part
h
Summary of Contents for XV-NA70BK
Page 33: ... No XA011SCH 2 7 MEMO ...