(No.YD034)1-11
3.2.2 Removing the traverse mechanism assembly (See Figure 7)
(1) Reverse the loading mechanism assembly.
(2) A card wire is removed from a FFC holder.
(3) Remove the four screws
B
attaching the traverse mecha-
nism assembly. Remove the traverse mechanism assem-
bly upward.
Fig.7
3.2.3 Removing the elevator (See Figure 8 and Figure 9)
• Prior to the following procedure, remove the traverse mecha-
nism assembly.
(1) Remove the two arms of the elevator from the two parts
f
by moving the arms in a direction of the arrow.
(2) Pull out the elevator in a rear direction.
Attaching the elevator:
Engage the two holes
g
to the two shafts on the front part of
the elevator. And then, attach the elevator.
Fig.8
Fig.9
Loading mechanism
assembly
B
B
B
B
Traverse mechanism
assembly
FFC Holder
Part
f
Part
f
Elevator
Slide cam
g
g
Shaft
Shaft
Elevator
Summary of Contents for XV-N318S
Page 22: ......
