1-10
XV-D721BK
XV-D723GD
Prior to performing the following procedure, remove
the top cover and the DVD mechanism assembly.
Removing the DVD servo board
(See Fig.17)
Turn over the DVD mechanism assembly and
disconnect the card wire from connector CN102 and
CN103 on the DVD servo board.
Remove the two screws H attaching the DVD servo
board. Move the DVD servo board in the direction of
the arrow to release the two corner joints d.
1.
2.
Removing the FL board / the power
switch board (See Fig.18 and 19)
Prior to performing the following procedure, remove
the top cover and the front panel assembly.
Remove the eight screws I and three screws J on
the back of the front panel assembly. Remove the FL
board and the power switch board at the same time.
Disconnect the harness from connector CN903 on
the FL board.
1.
2.
<Front panel assembly>
Fig.17
Fig.18
Fig.19
DVD mechanism board
CN103
Joint d
Joint d
CN102
DVD servo board
FL board
Power switch board
Power switch board
CN903
FL board
H
I
I
I
I
J
J
H