18
English
“DISC FULL” is displayed, even though the pos-
sible recording time is not used up.
“DISC FULL” is displayed, even though the num-
ber of tracks and recording time are not at the limit.
The JOIN function sometimes does not work.
The remaining usable time on the disc does not in-
crease even when tracks are erased.
The sound skip during fast forward or fast rewind.
The amount of recorded time on the disc added to
the amount of remaining time falls shout of the
disc’s total possible recording time.
OK
DIGITAL
NO
DIGITAL
Minidisc Limitations
The minidisc records information in an original format that differs from that of conventional cassette tapes or DATs.
Since there are some limitations with this recording format, the following types of conditions may arise. These condi-
tions are not malfunctions.
Condition
Cause
With the minidisc, there is a maximum number of tracks which
can be recorded, regardless of time. More than 254 tracks cannot
be recorded on a disc.
When parts of the disc are erased and re-recorded, blank spots are
created on the disc. When recording to such a disc, one track of
data is divided and recorded in the blank areas. During recording,
when these divided parts become numerous, the “DISC FULL”
message may be displayed. When a part of 8 seconds or less (SP
mode) is created by division, that track cannot be joined by the
JOIN function, and even if it is erased, the remaining usable time
on the disc does not increase. Tracks divided into small pieces
may skip when fast forward or fast rewind is done.
Minidiscs must have at least 2 seconds (SP mode) of continuous
space in order to record. For this reason, the actual recording time
of discs with a lot of short blank areas becomes shorter.
Rules of Digital Dubbing
The following rules regarding copyright exist for dubbing to MDs from CDs or DATs through digital terminals.
SCMS (Serial Copy Management System)
Minidiscs can record clear sound with low loss of quality from CDs or DATs through each component’s digital input/output
terminal. However, minidiscs are set up so that a disc recorded in this way cannot be recorded onto another minidisc through
digital input/output terminals. In other words, you can not make a copy of a copy. This rule is called SCMS (Serial Copy
Management System).
The recorder is designed in compliance with this rule. If you try to make a copy of a copy the error message “SCMS
CANNOT COPY” is displayed, and dubbing can not be done.
It may be unlawful to record or play back copyrighted material without the consent of the copyright owner.
Maintenance
Unit:
Wipe the unit and remote control with a soft cloth. Remove stubborn dirt using a cloth which has been dipped in
water or soapy water and wrung out, and then wipe dry.
• If you intend to use a chemically treated cleaning cloth, read its directions first.
• Do not use alcohol or paint thinners.
MDs:
If the MD cartridge is dirty, wipe it with a damp cloth and then wipe dry.
When storing MDs, avoid locations which are
• Exposed to direct sunlight.
• Susceptible to high levels of humidity or dust.
• Directly exposed to heat from a heating appliance.
• On top of a car dashboard or near the rear window.
Handling the MDs
• Do not open the shutter. The shutter is usually locked to prevent opening. Do not force to open it or the disc may
be destroyed.
