background image

G-1

IMPORTANT FOR LASER PRODUCTS

REPRODUCTION OF LABELS

1

CLASSIFICATION LABEL, PLACED ON REAR ENCLOSURE

2

WARNING LABEL, PLACED INSIDE THE UNIT

CLASS      1
LASER      PRODUCT

1.

CLASS 1 LASER PRODUCT

2.

DANGER: Invisible laser radiation when open and interlock failed or
defeated. Avoid direct exposure to beam.

3.

CAUTION: Do not open the top cover. There are no user service-
able parts inside the Unit; leave all servicing to qualified service
personnel.

IMPORTANT for the U.K.

DO NOT cut off the mains plug from this equipment. If the plug
fitted is not suitable for the power points in your home or the cable
is too short to reach a power point, then obtain an appropriate
safety approved extension lead or consult your dealer.

BE SURE to replace the fuse only with an identical approved type,
as originally fitted.

If nontheless the mains plug is cut off ensure to remove the fuse
and dispose of the plug immediately, to avoid a possible shock
hazard by inadvertent connection to the mains supply.

If this product is not supplied fitted with a mains plug then follow
the instructions given below:

IMPORTANT.

DO NOT make any connection to the terminal which is marked with
the letter E or by the safety earth symbol or coloured green or
green-and-yellow.

The wires in the mains lead on this product are coloured in
accordance with the following code:

Blue :        Neutral
Brown :     Live

As these colours may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:

The wire which is coloured blue must be connected to the terminal
which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the
terminal which is marked with the letter L or coloured red.

IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.

CAUTION
To reduce the risk of electrical shocks, fire, etc.:
1. Do not remove screws, covers or cabinet.
2. Do not expose this appliance to rain or moisture.

Warnings, Cautions and Others

DANGER: Invisible laser 
radiation when open and 
interlock failed or defeated.
AVOID DIRECT EXPOSURE 
TO BEAM.                         (e)

ADVARSEL: Usynlig laser-
stråling ved åbning, når 
sikkerhedsafbrydere er ude 
af funktion. Undgå udsæt-
telse for stråling                 (d)

VARNING: Osynlig laser- 
strålning när denna del är 
öppnad och spärren är 
urkopplad. Betrakta ej 
strålen.                              (s)

VARO: Avattaessa ja suo-
jalukitus ohitettaessa olet 
alttiina näkymättömälle 
lasersäteilylle. Älä katso 
säteeseen.                         (f)

Caution –– POWER switch!
Disconnect the mains plug to shut the power off completely. The
POWER switch in any position does not disconnect the mains line.
The power can be remote controlled for XL-V230BK.

XL-V130/230 BS Safety * 2

97.3.7, 4:07 PM

1

Summary of Contents for XL-V130BK




















Reviews: