JVC VN-V686U, Instructions Manual

Page: 26 / 121

26
Network Settings
Setting the IP address for VN-V686U
There are two methods to set the IP address for
VN-V686U as follows.
(A) Assigning an IP address to VN-V686U
from the DHCP server
(B) Assigning a static IP address to VN-
V686U
䡵
(A) Assigning an IP address from the
DHCP server
●
VN-V686U is set to
A
DHCP Enable
B
(the DHCP
client function is ON) by default. To assign an
IP address from the DHCP server, connect the
DHCP server to the LAN, set the [IP setting] of
VN-V686U to
A
DHCP
B
, and click the [OK]
button. (
A
Page 30)
●
For details on IP addresses assigned to VN-
V686U, consult your network administrator.
You can look up the IP address of VN-V686U
using the search tool in the supplied CD-
ROM.
For details, please refer to
A
Readme
B
file in
the CD-ROM.
Note:
●
Set the DHCP server such that the same IP
address is always assigned to the MAC address
of VN-V686U by the DHCP server. Connection
may fail if the above setting is not performed.
䡵
(B) Assigning a static IP address
䢇
System configuration required for setting
IP address
VN-V686U at factory default is set to
A
DHCP
Enable
B
(DHCP client function is On). When it is
connected to a LAN without DHCP servers, it will
activate under the following IP address after
timeout.
IP address : 192.168.0.2
Subnet mask : 255.255.255.0
Default gateway : None
Memo
:
●
To set a static IP address for VN-V686U,
connect VN-V686U, the switching hub and the
computer for setting using a straight LAN cable
of Category 5 and above.
䢇
Set up the computer for setting the IP
address.
●
Minimum computer specifications for
setting
OS : Windows XP (Professional or
Home Edition) (SP2)
Web browser
: Internet Explorer Version 6.0
Note:
●
When setting the IP address for VN-V686U, do
so by using a network that is made up only of
VN-V686U, the computer for setting and the
switching hub.
●
Using a hub connected to other network
devices or networks via a LAN cable for setting
can cause problems.
IP Address Settings