JVC VN-V26U - Network Camera Instructions Manual Download Page 39

Page: 39 / 104

Character strings entered here will be written to the JPEG comment segment
(item name: camera). Refer to the API Guide on the file formats of JPEG.

Monitor Type

For selecting the monitor type according to the monitor used to display the
video images. The picture quality varies according to the type of monitor
selected.

Custom

: Enables setting of picture quality according to the user’s

preference.

LCD1, LCD2

: Picture quality setting for LCD monitors. Two types are

available for selection according to the user’s preference.

CRT

: Picture quality setting for CRT (cathode-ray tube) monitors.

[Set values: Custom, LCD1, LCD2, CRT]

Black Level

For adjusting the black level. Lowering the value darkens the video image.
Increasing the value brightens the image.

[Setting range: 0 ~ 2]

Note:

●

If the black level is set to “0”, this may be too low depending on the
monitoring device, or dark area will become complete black.

●

When using MPEG4 images, set to either “1” or “2”.

Gamma

To alter the appearance of dark areas in a video image, adjust the gamma
curve.

Off

: Do not perform gamma correction. The entire image appears

dull.

-3 ~ 3

: Perform gamma correction. When this is set to “0”, standard

gamma correction is performed. Setting to a smaller value
darkens the image, while increasing the value brightens the
image.

[Set values: Off, -3 ~ 0 ~ 3]

Note:

●

The set value is fixed when the monitor type is set to

For setting the type of edge enhancement.

Low

: Enhances both thick and thin edges.

High

: Enhances thin edges.

[Set values: Low, High]

Note:

●

The set value is fixed when the monitor type is set to

For setting the intensity of edge enhancement.

Larger value

: Increases the intensity of edge enhancement.

Smaller value

: Decreases the intensity of edge enhancement.

[Setting values: -5 ~ 0 ~ 5]

Color Level

For adjusting the color level.

Larger value

: Increases the color level.

Smaller value

: Decreases the color level.

[Setting values: -5 ~ 0 ~ 5]

VN-V25U_26U_EN.book Page 39 Friday, January 18, 2008 2:56 PM

Summary of Contents for VN-V26U - Network Camera









































































































Search results

Summary of Contents for VN-V26U - Network Camera

Reviews:

Related manuals for VN-V26U - Network Camera

Brands by name

Popular brands

JVC VN-V26U - Network Camera, Instructions Manual

Search results

Summary of Contents for VN-V26U - Network Camera

Reviews:

Related manuals for VN-V26U - Network Camera

Brands by name

Popular brands