Auto Pan
.
Specifies the auto pan settings. This item sets the
Auto Pan operation which moves at a specific
speed from the preset [Start].
0
Click [Auto Pan] on the left side of the screen to
open the setting screen.
0
When you click the [Apply] button, the settings
selected for [Mode] and [Speed] become valid
on the viewer, and they are stored in the
computer.
.
Mode
Select the [Mode] of the auto pan operation.
0
Right:
Rotate the camera horizontally in the right
direction from the [Start].
0
Left:
Rotate the camera horizontally in the left
direction from the [Start].
0
Return:
Move between [Start] and [Return] in the
clockwise direction from the [Start] toward the
[Return].
You can specify any random position as the start
and return positions except under the following
conditions.
0
Tilt angle of 90
° or larger
(An error message appears if the angle is set
to 90
° or larger.)
Memo :
0
If the zoom ratio between the [Start] and [Return]
is different from each other, linked operations
between zoom and pan/tilt may not be even.
Speed
Select the auto pan operation speed.
[Set values: Low, Middle, High]
Start, Return
Select the [Start] and [Return] (only during “Return”)
of the operation. Operate the camera manually,
decide on a position and click [Set] to register.
0
[Set]:
Complete the Auto Pan settings.
0
[GoTo]:
Move the camera to the registered position.
Memo :
0
For details on the manual operation, see [PTZ
Control].
[Control] - [PTZ Settings]
79
Operation
