JVC VN-H657BU, Instruction Manual

Page: 70 / 120

[Privacy Mask] Page
Privacy Mask is a feature that enables masking of
a portion of the video image.
You can set 8 rectangular privacy masks for this
unit.
This page can be used during access using
“admin” or “operator”.
0
Click [Advanced Settings] in the side menu, and
click [Privacy Mask].
0
Press the [OK] button to enable the new
settings.
0
If the distribution capability of the camera is
exceeded when images are acquired from the
camera by the Built-in Viewer or other clients,
images may not appear on the [Privacy Mask]
page. Stop the Built-in Viewer or other clients
before using the [Privacy Mask] page.
(
A
p.107 [Exiting Built-in Viewer] )
0
If the [OK] button is pressed upon entering an
invalid value, a warning message will appear
and the entry will be denied. Press the [Cancel]
button to restore the invalid entry to the value
before the change was made.
Note :
0
When the setting page for privacy mask is
opened, zoom will be at the Wide end and [Auto
Flip] is set to “OFF”.
0
To specify the privacy mask settings, set the
zoom to the wide-angle end in advance.
0
The size of the preset mask changes with the
pan, tilt, and zoom operation.
0
The privacy mask settings will also apply to
videos recorded to the FTP server or microSD
card, as well as those to be distributed.
Settings
.
* Setting values with
R
are default values.
Privacy Mask
For specifying whether to activate the Privacy Mask
feature.
When this is set to “ON”, the privacy mask specified
in [Mask Setting] will appear on the screen.
[Set values: ON,
R
OFF]
Memo :
0
When [Privacy Mask] is set to “ON”, zoom is set to
the Wide end, and [Auto Flip] is set to “OFF”.
(
A
p.68 [ Auto Flip ] )
Mask Setting
This item adjusts the mask. Click this item to open
the Mask Setting screen.
9 Mask Setting screen
.
0
Mask No.:
When “ON” is selected, the mask corresponding
to the selected number appears on the screen.
When “OFF” is selected, mask will not be
displayed on the screen.
[Set values: 0 to 7]
0
Size:
This item sets the size of the mask.
Use the [Shrink] or [Expand] button to set the
Width or Height of the mask.
0
Position:
This sets the position to place the mask. Set the
moving speed in [Pan/Tilt Speed].
[Set values: 1 to 8]
0
[Save] button:
This saves the new settings.
0
[Delete] button:
This removes the privacy mask of the specified
mask number.
0
[Close] button:
This closes the Mask Setting screen.
70
[Advanced Settings] Page - [Privacy Mask] Page
Se
tti
ng
Us
in
g In
ter
net
E
xplor
er