8
Connect the audio cable.
0
Get ready a separate cable for connecting to
the audio device.
0
After connecting the audio cable (supplied)
to the audio terminal of the camera, connect
the cable of the audio equipment with the
supplied audio cable by soldering or
crimping, and wrap the joint with insulation
tape.
0
Audio cable (brown/white) (mic input):
Connect with the cable from devices such as
a capacitor microphone that supports plug-in
power.
0
Audio cable (black/white) (line output):
Connect with the cable from devices such as
speakers with a built-in amplifier.
0
For information on the color and signal name
of the audio cable, refer to the following.
p.15 [List of Audio Cable Signals] )
.
Audio
terminal
Audio
Cable
To Mic/Speaker
Cable for connecting to the audio device
(microphone input/line output)
0
Shielded cable recommended
0
Length of 5 m or shorter recommended
Note :
0
When connecting the audio cable (supplied) to
the audio terminal, pay attention to the direction
of the connector.
9
After connection of the cables is
complete, bundle them with a wire
clamp (supplied).
.
Wire clamp
(suppiled)
Tie here
Wire clamp fixing
hole
Note :
0
To prevent the cables from tangling and coming
off, be sure to thread a wire clamp through the
wire clamp fixing hole to tie the cables.
10
Mount the terminal cover.
0
Return the terminal cover that was removed
in step 3 to its original position. The direction
to pull out the cables changes according to
the mounting method of the camera.
Pulling out the cables from the side
.
Terminal cover
Pulling out the cables from the top
.
Terminal
cover
Fall prevention wire
(To go under the terminal cover)
Note :
0
Be sure to mount the terminal cover to prevent
foreign objects or dust from entering.
0
When pulling out the cables from the top, make
sure the fall prevention wire go under the
terminal cover and pull it out together with the
other cables.
0
When pulling out the cables from the side,
remove the cable cover of the camera.
.
Cable cover
Preparation for installation and connection is
now complete. Next, mount the camera unit.
Installation and Connection Preparations (VN-H657BU)
27
Moun
tin
g
the
Ca
m
era
