I
Dome cover
The dome cover is a delicate object. Handle it
with care.
Note :
0
Do not peel off the protective sheet which is
attached at shipment, until the dome cover is
mounted on the main unit.
Ceiling mount section
.
K
N
L
M
L
K
M
P
J
Q
O
J
R
Reverse side
Terminal
J
Fixing holes (x3)
This hole is for mounting the ceiling clamping
bracket to the ceiling or the ceiling recessed
bracket (WB-S685U: Sold separately).
K
[AC24V
H
INPUT] AC 24 V input terminal
For connecting to AC 24 V power.
p.25 [Connect the power cable.] )
L
Audio terminal
For connecting the supplied audio cable.
List of Audio Cable Signals
Cable color
Signal Name
Brown
White
Mic Input
Black
GND
Black
White
Line Output
Black
GND
M
[10BASE-T/100BASE-TX] LAN cable
connection terminal
For connecting the unit to the network.
It supports PoE Plus (IEEE802.3at Type 2) and
enables you to use this camera without having
to connect to a power supply using a power
cord.
p.26 [Connect the LAN cable.] )
N
Alarm signal terminal (8-pin)
For connecting the alarm signal cable.
p.19 [Alarm Input/Output Signal] )
p.26 [Connect the alarm signal cable to the
List of Alarm Signal Terminal Signals
Pin Number
Signal Name
1
INPUT1
2
INPUT1 COM
3
INPUT2
4
INPUT2 COM
5
OUTPUT1
6
OUTPUT1 COM
7
OUTPUT2
8
OUTPUT2 COM
O
Fall prevention wire (for ceiling) mounting hole
Mount a fall prevention wire (for ceiling) from the
ceiling slab or channel to this hole to prevent the
camera from falling.
Memo :
0
The fall prevention wire (for ceiling) is not
supplied.
P
Wire clamp fixing hole
This is used to bundle wires.
Q
Fall prevention wire fixing bracket
This is for attaching the “fall prevention wire
D
”
of the camera.
R
Camera connection terminal (female)
For connecting to the connection terminal
(male) of the camera.
Name of Parts
15
Gettin
g Started