JVC VN-H237VPU, Instructions Manual

Page: 54 / 114

54
Internet Explorer Setting
Protocol Page
This page sets the protocol.
This page can be used during access using
A
admin
B
.
Memo:
●
Press the [OK] button to enable the new settings.
●
If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the value before the
change was made. If you press the [Cancel] button, other changed items will also be restored to the
values before the change was made.
●
When you connect via Internet Explorer after changing protocol settings, enter the address using
the new server port and port number in the address bar.
●
For protocol settings when using HTTPS with SNMP, see "HTTPS and SNMP Function Update
Procedure". (
A
Page 112)
* The [Set values] in bold letters are factory defaults.
Settings (continued)
B
C
D
A
Click [Advanced Settings] and [Protocol].
A
Server Certificate Specifies settings related to server certificates.
Information Displays valid server certificates.
Create Server Certificate Displays the screen for entering information required to create a
server certificate.
B
Protocol Settings Sets protocols.
HTTP/HTTPS Select the protocol to use.
[Set values: HTTP , HTTPS ]