112
Others
The camera's default settings do not support using the HTTPS and SNMP functions. To use the HTTPS
and SNMP functions, use the firmware update function via the Maintenance Page, and update to the
firmware version designated below. (
Acquire firmware for updating via the site below.
http://www3.jvckenwood.com/english/pro/vnetworks/index.html
The file names of the firmware files used for updating are as follows.
or
To use the HTTPS and SNMP functions, update using the firmware with the following file name
characteristics.
Note:
●
ActiveX for the Built-in Viewer is not included; with the camera at its factory default settings, install
the Built-in ViewerÅfs ActiveX to your PC via Internet Explorer while set to the factory default
settings, and update the camera's firmware.
To revert to the original firmware and not use the HTTPS and SNMP functions, update using the
firmware with the following file name characteristics.
You can install ActiveX to your computer by accessing the Built-in Viewer URL via Internet Explorer.
HTTPS and SNMP Function
Update Procedure
h137_v2.00.214forSupport.img
Model name
Version number
h137_v2.00.214woActiveX.img
Model name
Version number
h***_v*.**..www.woActiveX.img
h***_v*.**.***forSupport.img
Summary of Contents for VN-H237VPU
