JVC VN-H237VPU, Instructions Manual

Page: 13 / 114

13
Network
A
IP Setting Sets the DHCP client function.
To enable the DHCP, connect the camera to the network environment where
the DHCP server is running.
If you have
A
Enabled
B
the DHCP but the DHCP server does not exist, the
camera will start with the IP address of 192.168.0.2 and the subnet mask of
255.255.255.0 approximately 2 minutes after startup. For the IP address
details, see the "Instructions (IP Address Settings)."
[Set values: DHCP Disable , DHC
P Enable
]
B
IP Address Sets the IP address of camera.
[Factory default : 192.168.0.2]
C
Subnet
Mask Sets the subnet mask of camera.
[Factory default : 255.255.255.0]
D
Default
Gateway Sets the default gateway of camera. Enter 0.0.0.0 if you do not want to set a
default gateway.
[Factory default: 0.0.0.0]
Time
E
Time (read
only) Displays the clock time of camera.
The time transmitted by camera is recorded in the JPEG header.
Memo:
●
You cannot change the time with this item. For details about the time
settings, see the "Time" page. (
A
Page 63)
F
Time Zone Sets a time zone.
[Set value: (GMT-12:00) - (GMT) UTC - (GMT+12:45) ]
G
PC Time to
Camera Click the [ Set ] button to set the time of PC on the camera.
Memo:
●
Your PC’s time zone cannot be applied. Only the time will be set.