UX-T770R
1-15
Shield
CD mechanism board
Fig. 1
Fig. 2
CD mechanism
B
B
B
B
A
A
A
A
CN601
CN602
P011
CD servo
control board
<CD Player Unit Section>
Remove the rear panel.
Remove the left and right side panels.
Remove the CD player unit.
After turning back the CD player unit, remove the
four screws A retaining the CD servo control board
and shield.
From the connector CN601 on the CD servo control
board, disconnect the card wire outgoing from the
CD mechanism.
From the connector P011 on the CD mechanism P.C.
board, disconnect the connector wire outgoing from
the connector CN602 on the CD servo control board.
Remove the four screws B retaining the CD
mechanism.
While sliding the CD mechanism in the arrow
direction, take turn table out so carefully that it does
not come into contact with the chassis.
1.
2.
3.
4.
5.
6.
7.
8.
Removing the CD mechanism and CD
servo control P.C. board (See Fig. 1 and 2)
